Hioki 3455 - Page 32

1.4 Names and Functions of Parts
26
Key Function
1 Used to turn power on/off.
2
Used to set parameters.
Used to toggle between set voltage and monitor
voltage after resistance measurement.
3
Used to set parameters.
Used to set test voltage.
4
• Used to make fine adjustments to test voltage.
• Used to move the cursor to change units, val-
ues, etc.
• Used to display the date and time.
• Used to set the date and time.
5
• Used to make fine adjustments to test voltage.
• Used to move the cursor to change units, val-
ues, etc.
• Used to display the timer.
• Used to set the timer.
6
• Used to confirm entries.
• Used to stop temperature measurement.
Operating panel
6. 7.
2.
1.
8. 9. 10.
13.
14.
15.
11.12.
5.3.4.