4.2 Displaying PI and DAR
84
1. Measure insulation resistance.
To determine PI, continue measurement
for 10 minutes (for a default time setting).
To determine DAR, continue measurement
for one minute.
2. Stop measurement.
3. Press the key several times to
display PI, DAR 1 min/15 s, or DAR 1
min/30 s.
Every time the key is pressed the
indication on the LCD changes in the
order of resistance
current DAR 1
min/15s DAR 1 min/30s PI resis-
tance current , etc.
To Next Page
Loading...
