5.2 Changing the Measurement Period
59
Chapter 5 Changing Settings (as necessary)
5
Repeated recording operations can be conducted up to 55 days at one-day measuring intervals, and up
to 55 weeks at one-week measuring intervals.
The measured data file of repeated recording is saved as a separate binary file for each one-day
or one-week period on the SD memory card.
If [Repeat Record] is set to [1 Day], set the
[Start Time], [End Time], and [Repeat Num-
ber].
If [Repeat Record] is set to [1 Week], set the
[Repeat Number].
Repeat Record
Setting Contents:( : Default setting)
OFF
No repeated recording
1 Day Repeated recording at one-day intervals
1 Week
Repeated recording at one-week inter-
vals
Set the start and stop days for
repeated recording.
Repeat Number
Can be set to a value from
1 to 55.
During repeated recording, the
current iteration and total
number of set iterations is dis-
played, and the green arrow
flashes.
When repeated recording is set to [1 Week], the stop time is set automatically.
Relationship between real-time control and repeated recording
(count) settings
Real-time
control
Repeated
measurement
Real-time control time
and date setting
Repeated measurement
time setting
Repeat
number
Set-
ting
ON OFF
Start time and date and stop
time and date
--
ON 1 Week Start time and date -
Any value
from 1 to 55
ON 1 Day Start date and stop date Start time and stop time -
OFF OFF - - -
OFF 1 Week - -
Any value
from 1 to 55
OFF 1 Day - Start time and stop time
Any value
from 1 to 55
To Next Page
Loading...
Need help?
General
