Hioki PW3198 - Changing Hardware Settings

5.4 Changing Hardware Settings
64
Language
Sets the display language.
Color
Select the grid (graticule) type for the waveform screen.Sets the screen color.
Beep
Sets whether to beep when a key is pressed.
5.4 Changing Hardware Settings
Setting Contents:
Japanese Japanese
English
English
Chinese
Chinese (Simplified)
Display a
pull-down menu
to select a setting/
Select a value
to change
Select the setting/
change the value
Accept the setting
Cancel
[MAIN]
[SYSTEM] screen
Select a setting
Key operation during configuration
[HARDWARE]
Setting Contents:(  : Default setting)
COLOR1
Blue-gray
COLOR2 Blue
COLOR3
Black
COLOR4
Gray
COLOR5
White
Setting Contents:(  : Default setting)
ON
Beeps are enabled.
OFF
Beeps are disabled.