Hioki PW3198 User Manual

5.3 Changing the Recording Settings
63
Chapter 5 Changing Settings (as necessary)
5
Sets the TIMEPLOT interval (recording interval).
See:"Key operation during configuration" (p.61)
The time series graph recording time varies with the recorded param-
eters and TIMEPLOT interval setting.
See:"Recording Items" (p.62)
Recording times (reference value) for a Z4001 SD Memory Card 2GB
(Repeat Record: 1Week, Repeat Number: 55 times)
• Recording times do not account for event data and screen copy data. Recording times may be short-
ened when event data and screen copy data are stored on the card.
• Recording times are not dependent on connections.
• When repeated recording is set to [OFF], the maximum recording time is 35 days.
• When repeated recording is set to [1 Day], the maximum recording time is 55 days.
• When repeated recording is set to [1 Week], the maximum recording time is 55 weeks.
• Harmonics order data is not saved for [Power], but it is saved in THD.
Outputs the display image to the SD memory card or printer at the
set screen copy interval.
See:"Key operation during configuration" (p.61)
TIME PLOT Interval
Setting Contents:(  : Default setting)
1/ 3/ 15/ 30 sec, 1/ 5 /10/ 15/ 30 min, 1/2 hour, 150/180/1200cycle
The 150 cycle (50 Hz) and 180 cycle (60 Hz) settings provide the TIMEPLOT intervals
required for IEC 61000-4-30-compliant measurement. You can select 150 cycles (mea-
surement frequency of 50 Hz), 180 cycles (60 Hz), or 1,200 cycles (400 Hz).
TIME PLOT interval
Recording parameter setting
ALL DATA
(Saves all data)
P&Harm (Saves RMS values
and harmonics)
Power
(Saves RMS values only)
1sec 16.9 hours 23.6 hours 11.5 days
3sec 2.1days 3.0 days 34.6 days
15sec 10.6 days 14.8 days 24 weeks
30sec 21.1days 29.5 days 49 weeks
1min 42.2 days 8.4 weeks 55 weeks
5min 30.1 weeks 42.1 weeks 55 weeks
10min 55 weeks 55 weeks 55 weeks
15min 55 weeks 55 weeks 55 weeks
30min 55 weeks 55 weeks 55 weeks
1 hour 55 weeks 55 weeks 55 weeks
2 hours 55 weeks 55 weeks 55 weeks
150/180 /1200wave (Approx. 3 sec) 2.1 days 3.0 days 34.6 days
When the memory is full
The PW3198 stops recording data to the SD memory card.
Measuring for an extended period of time.
If repeated recording is enabled and the recording count set, the instrument can make measure-
ments for up to 55 weeks.
See: Long-term measurements over 1 month or longer: Enable repeated recording (see "Repeat Record" (p.A59)).
Disp COPY Interval
Setting Contents:(  : Default setting)
OFF/5min/10min/30min/1hour/2hour

Hioki PW3198 Specifications

General

Brand	Hioki
Model	PW3198
Category	Measuring Instruments
Language	English