Hioki PW3198 - Analyzing the Measurement Line Status When Events Occur

8.3 Analyzing the Measurement Line Status When Events Occur
124
You can display the waveform and measured values that obtained when an event occurred on the
[VIEW] screen by selecting the event you wish to analyze on the [EVENT LIST] screen.
8.3 Analyzing the Measurement Line Status
When Events Occur
Accept setting
The display will switch
to the [VIEW] screen,
and the waveform at
the time of the event
will be displayed.
Select a event
Return to
event list
You can analyze the
waveform when the event
occurred.
Event waveform
screen
[EVENT]
[LIST]
The event number, event
time, and event type will
be displayed.