Hioki PW3198 User Manual

14.3 Error Indication
218
Any instrument errors are displayed on the screen. If you experience an error, check the appropri-
ate corrective action. To clear the error display, press any key.
14.3 Error Indication
Error display Cause Corrective action/more information
FPGA initializing error
FPGA initializing error.
The instrument needs to be repaired. Contact your Hioki
distributor.
DRAM1, 2 error
DRAM error.
SRAM error
SRAM
error.
Invalid FLASH. FLASH error.
Invalid ADJUST. Adjustment value error.
Invalid Backuped values. One or more erroneous
backed-up system variables
have created a conflict.
*** CARD ERROR ***
Error while attempting to
access the SD Card.
Attempted to access a corrupt
file or corrupt SD memory
card. The SD memory card
was removed while it was
being accessed.
Back up the SD memory card’s contents on a computer
and then format the card with the instrument. Remove
the SD memory card and then insert it again.
See: "9.2 Formatting SD Memory Cards" (p.138),
"3.5 Inserting (Removing) an SD Memory Card"
(p.32)
*** CARD ERROR ***
Save failed.
Attempted to write data to a
write-protected file. The SD
memory card was removed
while data was being saved, or
a similar issue occurred.
Using a computer, check whether the file attributes are
set to read-only. If the attributes are set to read-only,
clear that setting. Check whether the SD memory card is
inserted into the instrument.
See: "3.5 Inserting (Removing) an SD Memory Card"
(p.32)
*** CARD ERROR ***
Load failed.
The file being loaded does not
exist on the SD memory card.
The file being loaded is cor-
rupt.
Update the instrument’s file list. You can update the file
list by accessing another screen, for example by press-
ing the DF1 key, and then pressing the DF4 key again. If
the file is corrupt, it is recommended to back up the file
on a computer (if possible) and then format the SD
memory card.
See: "9.2 Formatting SD Memory Cards" (p.138)
*** CARD ERROR ***
Formatting failed.
An SD memory card error
occurred, or the SD memory
card was removed during for-
matting.
Reinsert the SD memory card or replace the SD mem-
ory card.
See: "3.5 Inserting (Removing) an SD Memory Card"
(p.32)
*** CARD ERROR ***
SD Card locked.
The SD memory card is
locked.
Unlock the SD memory card.
*** CARD ERROR ***
SD Card full.
Unable to save file due to
insufficient space on the SD
memory card.
Delete files to make space or replace the SD memory
card.
See: "3.5 Inserting (Removing) an SD Memory Card"
(p.32)
*** CARD ERROR ***
SD Card not found.
No memory card is inserted. Insert an SD memory card.
See: "3.5 Inserting (Removing) an SD Memory Card"
(p.32)
*** CARD ERROR ***
SD Card not compatible.
An unsupported card such as
an SDXC memory card has
been inserted into the instru-
ment.
Use a compatible SD memory card.
*** CARD ERROR ***
No readable files found.
Unable to load files in the
[PW3198] folder as it has been
deleted.
The [PW3198] folder is created when the SD memory
card is formatted. It is also automatically created when
recording is started.
See: "9.2 Formatting SD Memory Cards" (p.138)

Hioki PW3198 Specifications

General

Brand	Hioki
Model	PW3198
Category	Measuring Instruments
Language	English