Hioki RM3544-01 - Displaying Communications Commands (Communications Monitor Function)

9.3 Controlling the Instrument with Commands and Acquiring Data
131
9
The communications monitor function can be used to display communications commands
and query responses on the instrument’s screen.
Displaying Communications Commands
(Communications Monitor Function)
1
Open the Settings Screen.
2
Open the Communications Interface Settings Screen.
3
Set the communications monitor to either ON or OFF.
4
Return to the Measurement screen.
The Settings screen
appears.
Switch the function menu
to P.2/2.
1
2
Move the cursor to the [IF] tab
with the left and right cursor
keys.
1
Selection
ON
OFF (default)
2
Return to the
Measurement screen.