5.1 Judging Measured Values (Comparator Function)
66
The judge timing can be delayed not to decide any judgment until a measurement value
becomes stable.
Example when the judge delay function is set to OFF
Example when the judge delay function is set to ON and the number of unjudged
measurements is three
Delaying the judge timing
1
Open the Settings Screen.
2
Open the Measurement Settings Screen.
Measurement
Fault (“- - - - -”)
is displayed
Measure-
ment
order
Judge
1st 2nd 3rd 4th 5th 6th
1st
judgment
5th
judgment
6th
judgment
3rd
judgment
4th
judgment
2nd
judgment
Unjudged
Measurement
Fault (“- - - - -”)
is displayed
Judge
1st 2nd 3rd 4th 5th 6th
5th
judgment
6th
judgment
4th
judgment
Unjudged
Measure-
ment
order
The Settings screen
appears.
Switch the function menu
to P.2/2.
1
2
Move the cursor to the
[MEAS] tab with the left and
right cursor keys.
To Next Page
Loading...
