5.1 Judging Measured Values (Comparator Function)
69
5
The volume cannot be adjusted.
If the volume is too loud, cover the opening on the bottom of the instrument, for example
with a piece of tape.
4
Select the number of times to sound the beeper for Hi judgments.
5
Repeat this process to configure settings for IN and Lo judgments.
6
Return to the Measurement screen.
Move the cursor to the setting
you wish to configure.
To sound the beeper con-
tinuously
To set the number of beeps:
Change the number
of beeps.
Setting range: 1 to 5 times, continuous
Return to the
Measurement screen.
To Next Page
Loading...
