Hirschmann BAT54-F Series User Manual

Routing and WAN connections
BAT54-Rail/F..
Release 7.54 06/08
11.7 Changes in other services
401
ing tag (configured here) are written to the RIP table with the interface's
tag.
Unmarked routes (tag '0') are not propagated over this interface unless
the interface itself is marked with tag '0'.
Note: The default routing tag in the list of RIP networks is different to that in
the WAN-RIP list. In the WAN, all routes set with the standard tag (0) are
propagated into the WAN with the tag configured there. In the LAN, on the
other hand, routes with the interface tag are propagated with the tag set
here. Similarly, routes with the tag configured here which are received at
the interface are internally given the interface tag. Furthermore if the in-
terface tag is set, those routes set with the default tag (0) are not propa-
gated.
D Routing tag list
Comma-separated list (max. 33 characters) of routing tags which are to
be accepted at the interface. If the list is empty all tags are accepted. If at
least one entry is in the list, then only the tags in this list are accepted. Fur-
thermore, the only routes to be propagated are those with the tags given
here. This also considers any translation via the standard routing tag.
Caution: The routing tag list in the table of RIP networks corresponds to
the one in the WAN-RIP table, with the one difference that a translation
via the standard routing tag is considered. This means for example that,
in the case of an interface tag '1' and the standard routing tag '0', the tag
'0' has to be included in the routing tag list because it is internally changed
to tag '1' when it is received. Conversely, the internal tag '1' is changed to
the external tag '0' on transmission.
The measure is necessary so that a virtualized router can also work
with routers which do not have tagging support.
The default setting has 'Intranet' and 'DMZ' in the table, whereby RIP is
deactivated for these entries.
U Timer settings
The Routing Information Protocol (RIP) regularly provides neighboring rout-
ers with updates on the available networks and the associated metrics
(hops). RIP uses various timers to control the exchange of routing informa-
tion.
D WEBconfig: Setup
 IP-router  RIP  Parameters
D Update interval
The time between two regular updates. A random value of +/- 5 seconds
is always added to this value.
D Possible values: 0 to 99 seconds.

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English