Hirschmann BAT54-F Series User Manual

Routing and WAN connections
BAT54-Rail/F..
Release 7.54 06/08
11.8 Load balancing
423
V For the required remote station, enter the DSL ports that are to be used
in LANconfig via Communication
 Remote sites  Remote sites
(DSL).
Telnet:
/Setup/WAN/DSL-broadband-peers
WEBconfig: Expert configuration  Setup  WAN  DSL-broadband-
peers
V Actitivate channel bundling for the relevant layers in LANconfig via Com-
munication
 General  Communication layers.
Telnet:
/Setup/WAN/Layer
WEBconfig: Expert configuration  Setup  WAN  Layer
U Dynamic load balancing with multiple DSL connections
The first step in setting up dynamic load balancing is to define the Internet
accesses, e.g. 'INET1' and 'INET2', with the aid of the LANconfig Wizard.
V To distribute Internet traffic across different DSL interfaces, the individual
remote stations are assigned to different DSL ports in LANconfig under
Communication
 Remote sites  Remote sites (DSL).
Telnet:
/Setup/WAN/DSL-broadband-peers
WEBconfig: Expert configuration  Setup  WAN  DSL-broadband-
peers

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English