More services
BAT54-Rail/F..
Release
7.54
06/08
12.3
DNS
477
With the following commands you add stations to the Host names table:
For example, if would like to access the mail server at your headquarters
(name: mail.yourdomain.com, IP: 10.0.0.99) via the router from a branch
office, enter:
Stating the domain is optional but recommended.
When you now start your mail program, it will probably automatically look
for the server 'mail.yourdomain.com'. The DNS server thereupon returns
the IP address '10.0.0.99'. The mail program will then look for that IP
address. With the proper entries in the IP routing table and peer list, a
connection is automatically established to the network in the headquar-
ters, and finally to the mail server.
V To resolve entire name areas of another DNS server, add a forwarding
entry consisting of a name area and remote station:
When entering the name areas, the wildcards '?' (for individual charac-
ters) and '*' (for multiple characters) may be used.
To reroute all domains with the ending '.intern' to a DNS server in the
LAN of the remote station 'COMPANY', create the following entry:
LANconfig TCP/IP  DNS  Host names  Add
WEBconfig …
 DNS-table  Add
Terminal/Telnet
cd setup/DNS/DNS-
table set mail.yourdomain.com 10.0.0.99
LANconfig TCP/IP  DNS  Forwarding  Add
WEBconfig …
 DNS destination table  Add
Terminal/Telnet
cd setup/DNS/
DNS-destination- table set *.intern COMPANY
To Next Page
Loading...
Need help?
General
