Hirschmann BAT54-F Series User Manual

Wireless LAN – WLAN
84
3.4 Configuration of WLAN parameters
BAT54-Rail/F..
Release 7.54 06/08
Configuration with LANconfig
For the configuration with LANconfig you will find the IEEE-802.1x settings in
the configuration area 'WLAN Security'. This is where you decide if you want
to activate IEEE-802.1x. If IEEE-802.1x is activated, a RADIUS server must
be defined for the IEEE-802.1x authentication.
Configuration with WEBconfig or Telnet
Under WEBconfig or Telnet you will find the settings for IEEE-802.1x under
the following paths:
U IPSec over WLAN
Only with the VPN Option. Not available with all BAT devices.
With the help of the IPSec-over-WLAN technology in addition to the security
measures described already, a wireless network for the exchange of espe-
cially sensitive data can be optimally secured. To this end, the BAT Wireless
Router access point is upgraded to a VPN gateway with the VPN Option. In
addition to the encryption per 802.11i, WPA or WEP, the BAT Wireless
Router now offers the possibility of encrypting wireless connections with an
IPSec-based VPN.
Configuration tool Menu/Table
WEBconfig Expert configuration
 Setup  IEEE802.1x  Ports
Terminal/Telnet
cd /Setup/IEEE802.1x/Ports

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English