Specifications of the server chassis
The following table shows the specifications of the server chassis.
Table A-1 Specifications of the server chassis
Item Specifications
Appearance
information
Type 19-inch rack-mount (EIA standards)
Height 12 U (EIA standards)
Number of slots Server blade 15
Switch module 2
Management module 2 (redundancy)
Management LAN
module
2 (redundancy)
I/O board module 28
Power supply module 2 (at shipping time). A maximum of 6
modules can be installed (redundancy).
Fan module 10 (redundancy)
Cooling fan control
module
2 (redundancy)
Chassis size Height 527 mm (excluding projections)
Width 447 mm (excluding projections)
Depth 830 mm (excluding projections)
Front panel Embedded in the management module
Weight Maximum: 250 kg
(This is the value when all modules are
installed, and includes the weight of the
rack rails.)
Temperature 5 to 40 °C (When not operating: -10 to 43
°C)
Humidity 8 to 80% (When not operating: 8 to 90%)
Vibration Maximum of 2.45m/s5 (When not
operating: 9.80 m/s5 max.)
Cooling method Air cooling by fans
Air suction port: Front side
Air exhaust port: Rear side
Flow rate 14.4 m3 / min
Specifications of server blades
The following table shows the specifications of server blades.
A-2
System Unit Specifications
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
