Hitachi Compute Blade 2500 - General procedure for setup of the CB 2500

General procedure for setup of the CB 2500
From installing the system unit to performing the initial settings for
a server blade
The following figure shows the general procedure from installing the CB 2500
system unit to performing the initial settings of a server blade.
Figure 1-6 General procedure for the initial settings
Powering on a server blade and setting up the OS
The following figure shows the general procedure from powering on a server
blade to setting up the OS. For details on the tasks in LP mode, see the
Hitachi Compute Blade 2500 Series Logical partitioning manager User Guide.
1-14
CB 2500 Overview
Hitachi Compute Blade 2500 Series Getting Started Guide