Tip:
• When you start the remote console, a confirmation dialog box regarding
the digital signature for Java might be displayed. This does not indicate a
problem.
• If the server blade is powered on, the VGA window of the server blade is
displayed when you start the remote console.
• If the server blade is powered off and no VGA signal is output, the remote
console displays "No Signal".
Related topics
• Logging in to the management module on page 3-5
Starting the remote console from the Web console on a server blade
This section describes how to start the remote console by using a Web
console that is logged in to a server blade.
1. Start the web browser for the system console and enter the URL
"https://IP-address-of-server-blade/".
The Web console starts, and the login window to the server blade is
displayed.
2. In the Username field, enter "user01". In the Password field, enter
"pass01".
This user name and password combination is the initial setting (the
setting at shipping time). If you have modified the settings, enter the
modified user name and password as necessary.
3. Click OK to log in.
The Remote Console Launch window is displayed.
4. In the Remote Console Launch window, click Launch Remote
Console.
Related topics
• Hitachi Compute Blade 2500 Series Management Module User Guide
manual
Remote console window
This section describes the remote console window and the information
displayed in the window.
5-6
Functionality and Operation of the Remote Console
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
Need help?
General