Hitachi Compute Blade 2500 - Starting the remote console

Operating
system of
the server
VGA driver Display resolution
Number of
colors
Windows • Display driver in Server
installation and monitoring tool
(recommended)
• Standard SVGA driver
800 x 600 16 bits
32 bits
1024 x 768
(recommended)
16 bits
32 bits
1280 x1024 16 bits
32 bits
1600 x 1200 16 bits
32 bits
Linux VESA driver 640 x 480 16 bits
32 bits
800 x 600 16 bits
32 bits
1024 x 768
(recommended)
16 bits
32 bits
Starting the remote console
This section describes how to start the remote console. You can start the
remote console from a Web console that is logged in to the management
module or a server blade.
If the system console is running on OS X, you must install the certificate file
and enable Java accessibility in advance.
Set up the System console that OS X is running
If you want to use a PC running OS X as the system console, you must set up
the environment as follows in advance:
• Install the certificate file.
• Enable Java accessibility.
Installing the certificate file
1. In Finder, from the Go menu, execute the Utilities command.
The Utilities window opens.
2. In the Utilities window, execute the Terminal icon.
The Terminal window opens.
3. In the Terminal window, enter the following commands:
5-4
Functionality and Operation of the Remote Console
Hitachi Compute Blade 2500 Series Getting Started Guide