Hitachi Compute Blade 2500 - Screen messages displayed by the remote console

Screen messages displayed by the remote console
This section describes the messages displayed on the remote screen when an
error occurs (for example, "No images can be displayed on the remote
console") and their meanings.
Table 5-2 Message displayed on the remote screen
Message Description
No Signal For some reason (for example, because the operating
system of the server blade has not started), the remote
console is not receiving any VGA signal from the server
blade.
VideoStopped_OutOfRange The VGA signal sent from the server blade was interrupted
or the VGA signal became unavailable for display on the
remote console.
Functionality and Operation of the Remote Console
5-15
Hitachi Compute Blade 2500 Series Getting Started Guide