EasyManua.ls Logo

Hitachi Compute Blade 2500 - Page 117

Hitachi Compute Blade 2500
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Items Specifications
RAID function RAID 0, 1
VGA Resolution 640 x 400 - 1680 x 1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Internal SD card on Daughter card Maximum: 2 (Required SD
card enablement kit)
Onboard LAN Midplane I/F 10Gbps 4 port converged
network adapter
Functions Wake on LAN, PXE boot,
iSCSI, FCoE
Mezzanine card
slot
2
Number of slots 2
Management
functionality
Remote console Supported
COM Serial redirection
DC input supply voltage DC +12V
Front interface USB 1 (USB 3.0)
KVM connector 1 (VGA, COM, 2-port USB
2.0)
DCMI (Data Center Management Interface) Supported
Power consumption 510 W
External dimensions (width x depth x height) 215.4 mm x 500.6 mm x
51.1 mm
Weight 6.7 kg
Note:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. The mezzanine card slot 1 is used exclusively with an onboard LAN.
Table A-14 PCI expansion blade specification
Items Specifications
I/O I/O adapter
slot
Interface PCI Express
Number of slots Maximum: 6 slots
- Full height, Full length slots: 2 (I/O adapter slot
0/1)
- Low profile (MD2) slots: 4 (I/O adapter slot
2/3/4/5)
I/O adapter slot 0 Electrical x8/Physical x8; Maximum: 25 W
I/O adapter slot 1 - Electrical x16/Physical x16; Maximum: 225W
(PCI expansion blade ((x16 FH 1slot)))
System Unit Specifications
A-11
Hitachi Compute Blade 2500 Series Getting Started Guide

Table of Contents

Other manuals for Hitachi Compute Blade 2500

Related product manuals