Hitachi Compute Blade 2500 User Manual

Remote console ........................................................................................... 1-13
LCD touch console ....................................................................................... 1-13
General procedure for setup of the CB 2500 ........................................................ 1-14
From installing the system unit to performing the initial settings for a server
blade .......................................................................................................... 1-14
Powering on a server blade and setting up the OS ......................................... 1-14
Stopping the running system unit ................................................................. 1-15
2 CB 2500 Appearance ......................................................................... 2-1
Appearance of the server chassis .......................................................................... 2-2
Server chassis and the locations where modules are installed ........................... 2-2
ID tag of the server chassis ............................................................................ 2-3
Slots and location tags of the server chassis .................................................... 2-3
Server blade appearance ...................................................................................... 2-5
Appearance of a full-wide blade ...................................................................... 2-5
Appearance of a half-wide blade ..................................................................... 2-9
Appearance of a PCI expansion blade ........................................................... 2-12
About network devices installed in a server blade .......................................... 2-13
Appearance of the I/O board module .................................................................. 2-16
Appearance of the management module ............................................................. 2-18
Appearance of the management LAN module ....................................................... 2-20
Appearance of the switch module ....................................................................... 2-21
1/10Gb LAN switch module .......................................................................... 2-21
Appearance of the Brocade 10Gb DCB switch module .................................... 2-22
Appearance of the power supply module ............................................................. 2-24
Appearance of the fan module ............................................................................ 2-25
3 Starting the CB 2500 and Performing Initial Setup ............................... 3-1
Connecting the system unit to the power supply .................................................... 3-2
Preparing the system console used for configuring the settings of the CB 2500 ........ 3-2
Setting the Web browser used to display the Web console ............................... 3-3
Connecting the system console to the management module ............................. 3-3
Management LAN when LPAR manager is used ............................................... 3-4
Setting the network information of the system console .................................... 3-5
Setting the network for the server blades and modules .......................................... 3-5
Logging in to the management module ........................................................... 3-5
Changing the password used to log in to the management module ................... 3-6
Setting the chassis ID of the server chassis ..................................................... 3-7
Changing the network addresses of the management module, server blades,
and switch modules ....................................................................................... 3-7
Setting a user account for the LAN switch module ........................................... 3-8
Setting a user account for the Brocade 10Gb DCB switch module ...................... 3-9
Connecting the system console and the system unit to the management LAN .. 3-10
Preparing the server blades so that they can operate in LP mode .......................... 3-11
Powering on the server blade ............................................................................. 3-11
Resetting the power of the server blade .............................................................. 3-12
Restarting the BMC of a server blade .................................................................. 3-13
Setting the UEFI of a server blade ....................................................................... 3-14
iv
Hitachi Compute Blade 2500 Series Getting Started Guide

Hitachi Compute Blade 2500 Specifications

General

Brand	Hitachi
Model	Compute Blade 2500
Category	Server
Language	English