Figure 2-4 Slots on the server chassis (front side)
The following figures show slots and their slot numbers on the rear of the
server chassis.
Figure 2-5 Slots on the server chassis (rear side 1)
Tip: One PCI expansion blade is always used in combination with one half-
wide blade. Therefore, when a PCI expansion blade is used, half-wide blades
are installed in odd-numbered slots, PCI expansion blades are installed in
even-numbered slots, and then each blade is connected to a corresponding
I/O adapter.
2-4
CB 2500 Appearance
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
