Network devices
mounted on the
server blade and
installation
locations
1
Physical port
number
2
PCI bus
number
Function
Switch module
of the
connection
destination
4 3 Switch module 2
Onboard LAN 1 CB 520X B1:
133(85h)
4
CB 520H B3/B4:
7(07h)
0 Switch module 1
2 1 Switch module 2
3 2 Switch module 1
4 3 Switch module 2
Notes:
1. Mezzanine card slot 3 is not supported.
2. A physical port number that actually exists in the system
3. In an SMP configuration, the PCI bus number changes as shown below. Note
that SMP configurations support only CB 520X B1 server blades.
¢
2-blade SMP configuration
Node #1: 8(08h)
Node #2: 136(88h)
¢
4-blade SMP configuration
Node #1: 8(08h)
Node #2: 72(48h)
Node #3: 136(88h)
Node #4: 200(C8h)
4. In an SMP configuration, the PCI bus number changes as shown below. Note
that SMP configurations support only CB 520X B1 server blades.
¢
2-blade SMP configuration
Node #1: 69(45h)
Node #2: 197(C5h)
¢
4-blade SMP configuration
Node #1: 37(25h)
Node #2: 101(65h)
Node #3: 165(A5h)
Node #4: 229(E5h)
2-14
CB 2500 Appearance
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
