Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
67
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
67
Hitron CGNV4 User’s Guide
WPS Enabled Use this field to turn Wifi Protected Setup (WPS) on or
off on the 2.4GHz network.
Select ON to enable WPS.
Deselect OFF to disable WPS.
See The WPS & Security Screen on page 71 for more
information on using WPS.
SSID Settings
Network Name (SSID) Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
Enable Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
Broadcast SSID Use this field to make this SSID visible or invisible to
other wireless devices.
Select ON if you want your network name (SSID) to
be public. Anyone with a wireless device in the
coverage area can discover the SSID, and attempt
to connect to the network.
Select OFF if you do not want the CGNV4 to
broadcast the network name (SSID) to all wireless
devices in the coverage area. Anyone who wants
to connect to the network must know the SSID.
WMM(QoS) This field displays whether Wifi MultiMedia (WMM)
Quality of Service (QoS) settings are Enabled or
Disabled on this SSID.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 21: The Wireless: Basic Settings 2.4GHz Screen (continued)
To Next Page
Loading...
Need help?
General
