Timers Menu - Continued
Output Menu
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
This timer is used to ensure there is someone on the premises when the system is in an
unset state.
Start Time: This is the start time at which a user must check in by pressing 0*5 on a system
keypad
End Time: This is the end time at which a user must check in by pressing 0*5 on a system
keypad
Interval Time: This is the frequency at which a user must check in by pressing 0*5 on a
system keypad
Example : This feature is used for a static guard or night watchman to check in and ensure
there is someone on the premises.
User Alert
There are two outputs on the Quantum 70, one for the external
siren (bell) and the other for the strobe. However, given that
they are not freely programmable the Output Menu is not
required for now.
NOT APPLICABLE
62
To Next Page
Loading...
Need help?
General
