System Options Menu - Continued
823 Ext.Blk Entry
824 FireExitBells
825 FireExReqCode
826 Tamper Rearm
82 UNSET OPTIONS
Used to select options for the panel when it is unset.
User Wlk Test when enabled allows the user to perform a
walk test of the system using 0#3 or through the User Menu
(please refer to appendix).
FireO/P Enabl when programmed to NO prevents a Fire
output activating when the system is unset. When armed it
does allow the Fire output activate. Not applicable on the
Quantum 70.
Ext.Blk Entry (extended block entry time), when enabled this
option adds the entry time of the first block to be unset to the
common entry time.
FireExitBells (fire exit bells), when enabled this option will
activate the internal bell when a fire exit input is activated.
FireExReqCode (fire exit requires code), when enabled this
option will prompt the user to input their code when a fire exit
input is activated.
When Tamper Rearm is enabled the panel will always rearm
after a tamper activation
821 User Wlk Test
822 FireO/P Enabl
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
64
To Next Page
Loading...
Need help?
General
