EasyBalancer EB 3500 Vibration testing and balancing device - Measurement setup, example
3 - 5
3.6 Measurement setup, example
Fig. 3-4: Measurement setup, example
1 - Machine / rotor (grinding wheel)
2 - EasyBalancer EB 3500
3 - Scale ring (optional)
4 - Vibration sensors
5 - Speed sensor
6 - Connection cable for vibration sensor
and speed sensor
7 - Speed sensor stand with magnetic base
8 - Reflective tape
Distance between speed sensor and reflective
tape 15...40 mm.
The distance may vary depending on the lighting conditions
and surface condition.
To Next Page
Loading...