Operation - Overall vibration EasyBalancer EB 3500
5 - 2
5.2 Overall vibration
Measurement of the overall vibration as per
DIN ISO 20816.
Observe safety instructions – Chapter 2.
The overall vibration is displayed in the unit mm/s
(vibration velocity). However, if the language is set
to “USA” in the settings, the display is in inch/s or
mm/s, depending on the units selected.
Preparations The vibration sensor is connected. The speed
input is not assigned or is not evaluated.
Close safety devices.
Basic menu \ Overall vibration.
The window “How do you want to measure?”
appears.
Select the measuring function and press .
To Next Page
Loading...