Hologic ThinPrep - Page 159

ORDERING INFORMATION
8.2 ThinPrep
®
Integrated Imager Operator’s Manual
8
* If the telescoping head is installed, it must be configured with ONE Hologic riser. 
The telescoping head must not be used with the Olympus riser.
** The standard tilting binocular head is limited to accommodating only ONE Olympus riser.
Table 8.1: Reordering Supply Items for the Integrated Imager
Item Description Quantity Part Number
Extension cable set 10-ft. extension cable for PC connection ea. 53033-001
Eyepiece, 10X, 24 mm Replacement eyepiece (should be used
in pairs)
ea. 51815-001
Objective, 4X Replacement 4X objective ea. 52462-001
Objective, 10X Replacement 10X objective ea. 52463-001
Objective, 40X Replacement 40X objective ea. 51200-001
Dust cover Microscope dust cover ea. 06210-001
Integrated Imager Operator’s Manual Additional operator’s manual ea. MAN-05283-001
Table 8.2: Optional Accessories
Item Description Part Number
Telescoping head* Telescoping binocular tube 52029-001
Riser Hologic riser (10mm) ASY-03268
Riser** Olympus (30mm) OEM-00585
Objective, 20X Optional objective ASY-03287