ThinPrep
®
Integrated Imager Operator’s Manual
4.21
OPERATION
Figure 4-23 Auto Scan - Subsequent Review
The slide data record will be updated to reflect:
• The time/date stamp that is written to the database at the time the slide is reviewed
• The user ID of the operator who conducted the review
• Coordinates of any electronic marks that were added during the review
REVIEW OF SLIDES NOT FOR USE WITH THINPREP IMAGING
If the Integrated Imager is used to look at non-Imager slides, the power must be on in order for the
controller to power the illumination, stage and X,Y axis stage controls.
The stage motion, focus, magnification and illumination are all manually adjusted by the user. Fol-
low your lab protocols for handling and screening of slides not for use with the Integrated Imager.
During scanning
During scan paused
To Next Page
Loading...
