118
Lubrication
Lubrication interval:
MAINTENANCE
SWIVEL CASE
TILLER HANDLE
BRACKET
PROPELLER
SHAFT
THROTTLE GRIP
SHAFT
THROTTLE
FRICTION KNOB
SHIFT LEVER
SHAFT
STEERING
FRICTION SHAFT/
BLOCK
TILLER HANDLE
PIVOT SHAFT
Wipe the outside of the engine with a cloth dipped in clean oil. Apply marine
anticorrosion grease to the following parts:
Apply anticorrosion oil to pivot surfaces where grease cannot penetrate.
Lubricate more frequently when used in salt water.
20 operating hours or a month after the date of purchase for initial lubrication,
then every 100 operating hours or 6 months.
05/10/26 10:03:03 3CZW0612_118
To Next Page
