EasyManua.ls Logo

Honda BF75A - Engine Oil Inspection and Refill

Honda BF75A
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
〈〉
〈〉
47
Inspection and Refilling
Engine oil is a major factor
affecting engine performance
and service life. Nondetergent
and low quality oils are not
recommended, because they
have inadequate lubricating
properties.
Engine Oil
Recommended oil
Running the engine with
insufficient oil can cause serious
engine damage.
PRE-OPERATION CHECKS
UPPER
LEVEL
MARK
LOWER
LEVEL
MARK
OIL LEVEL
DIPSTICK
SAE Viscosity Grades
AMBIENT TEMPERATURE
Position the outboard motor
vertically, and remove the engine
cover.
Remove the oil level dipstick and
wipe with a clean rag.
Reinsert the dipstick all the way in,
then pull it out and read the level.
If near or below the lower level
mark, remove the oil filler cap and
fill to the upper level mark with
the recommended oil. Tighten the
oil filler cap securely.
Use Honda 4-stroke oil or an
equivalent high detergent, premium
quality motor oil certified to meet or
exceed U.S. automobile
manufacturer’s requirements for API
Service Classification SG, SH. Motor
oils classified SG, SH will show this
designation on the container. Select
the appropriate viscosity for the
average temperature in your area.
SAE 10W-30 is recommended for
general, all-temperature use.
1.
2.
3.
05/10/26 09:51:35 3CZW0612_047

Table of Contents

Related product manuals