Do not operate the outboard
motor without the engine cover.
Exposed moving parts can
cause injury.
Perform the following
pre-operation checks with the
engine stopped.
46
Engine Cover Removal/Installation
PRE-OPERATION CHECKS
LOCK
UNLOCK
ENGINE COVER
FIXING LEVER
(REAR)
(FRONT)
UNLOCK
LOCK
ENGINE COVER
FIXING LEVER
6.
To remove, raise the front and rear
engine cover fixing levers and
remove the engine cover.
BF75A/90A is 4-stroke, water cooled
outboard motor which uses unleaded
regular gasoline for fuel. It also
requires the engine oil. Check the
following before operating the
outboard motor.
To install, set the engine cover,
and lock the front and rear engine
cover fixing levers.
05/10/26 09:51:23 3CZW0612_046
To Next Page
Loading...
