Be careful not to spill any fuel.
Spilled fuel vapor may ignite. If
any fuel is spilled, make sure
theareaisdrybeforestarting
the engine.
55
Do not touch the priming bulb
while running the engine.
Carburetor could overflow.
STARTING THE ENGINE
VENT KNOB
(Equipped type)
OOPPEENN
P
RIMING BULB
OUTLET END (MOTOR SIDE)
INLET END (FUEL TANK SIDE)
Open the fuel cap vent knob 2 to 3
turns.
Hold the priming bulb so that the
outlet end is higher than the inlet
(so that the arrow on the priming
bulb points up), and squeeze it
until it feels firm, indicating that
fuel has reached the motor. Check
for leaks.
3. 4.
05/10/26 09:53:03 3CZW0612_055
To Next Page
Loading...
