Honeywell Accenta Series - Set Up Bell Delay

Accenta/Optima Engineer’s Manual
26
Timers (cont’d)
LCD keypad:
To change the Bell Delay time from 00 to 12 minutes:
• Press [up arrow] for menu Set Up Timers.
• Press [7]or [SET]. Option 1 Set up Bell Time appears.
• Press [2]. The Bell Delay time in minutes is displayed.
• The cursor is under the first digit. Select [1].
• The cursor moves to the second digit. Select [2].
• To accept the change press [SET] then [RESET]
OR to cancel the change press the [RESET] button twice.
72 = Set Up Bell Delay
This delays the activation of the Bell for the required time. The range is 00-99 minutes. The default is 00
minutes.
NOTE: The Bell Delay delays the bell for one rearm period only. After rearm all alarms are immediate.
LED keypad:
To change the Bell Delay time from 00 to 12 minutes:
• Press [7] to enter Set up Timers.LED’s 1, 2 and 3 are
on.
• Press [2] for Bell Delay time in minutes. LED’s 1and 2
are on.
• Select [1] then [2]. LED’s 1 and 2 are on.
• To accept the change press [SET]. LED’s 1, 2 and 3
are on. Press [RESET].
OR to cancel the change press the [RESET] button
twice.
[7]
[SET] then [RESET]
[2]
12
3
4
5
6
7
8
12
3
4
5
6
7
8
or [RESET]
12
3
4
5
6
7
8
12
3
4
5
6
7
8
7>Set Up7>Set Up
7>Set Up7>Set Up
7>Set Up
Timers Timers
Timers Timers
Timers
Bell DelayBell Delay
Bell DelayBell Delay
Bell Delay
Minutes? 00Minutes? 00
Minutes? 00Minutes? 00
Minutes? 00
[2]
71>Set Up71>Set Up
71>Set Up71>Set Up
71>Set Up
Bell Time Bell Time
Bell Time Bell Time
Bell Time
[7] or [SET]
7>Set Up7>Set Up
7>Set Up7>Set Up
7>Set Up
Timers Timers
Timers Timers
Timers
[SET] then [RESET] or [RESET]
[up arrow]
Bell DelayBell Delay
Bell DelayBell Delay
Bell Delay
Minutes? 12Minutes? 12
Minutes? 12Minutes? 12
Minutes? 12
[1] and [2]