Honeywell Accenta Series User Manual

Accenta/Optima Engineer’s Manual
27
Timers (cont’d)
LED Keypad:
To change the Rearm Count:
.
• Press [7] to enter Set Up Timers.LED’s 1, 2 and 3 are on.
• Press [3] for Rearm Count. LED 1 is on.
• Select a number [0 - 9] to change the rearm count.
• To accept the change press [SET]. LED’s 1, 2 and 3 are
on. Press [RESET].
OR to cancel the change press the [RESET] button twice.
73 = Set Up Rearm Count
After an alarm the panel will automatically rearm itself when the external siren (Bell) timer has expired. Any
zones which still remain open at that time will be automatically omitted . The default is 3 rearms.
0 = no rearms
1-8 = number of rearms
9 = always rearm
LCD keypad:
To change the Rearm Count:
• Press [up arrow] for menu Set Up Timers.
• Press [7]or [SET]. Option 1 Set up Bell Time appears.
• Press [3]. The Rearm Count is displayed (default 3).
• Select a number [0 - 9] to change the rearm count.
• To accept the change press [SET] then [RESET]
• OR to cancel the change press the [RESET] button twice.
[7]
[SET] then [RESET] or [RESET]
[3]
[Number]
12
3
4
5
6
7
8
12
3
4
5
6
7
8
12
3
4
5
6
7
8
7>Set Up7>Set Up
7>Set Up7>Set Up
7>Set Up
Timers Timers
Timers Timers
Timers
Rearm CountRearm Count
Rearm CountRearm Count
Rearm Count
33
33
3
[3]
71>Set Up71>Set Up
71>Set Up71>Set Up
71>Set Up
Bell Time Bell Time
Bell Time Bell Time
Bell Time
[7] or [SET]
7>Set Up7>Set Up
7>Set Up7>Set Up
7>Set Up
Timers Timers
Timers Timers
Timers
or [RESET]
73>Set Up73>Set Up
73>Set Up73>Set Up
73>Set Up
Rearm Count Rearm Count
Rearm Count Rearm Count
Rearm Count
[SET] then [RESET]
[up arrow]
12
3
4
5
6
7
8

Honeywell Accenta Series Specifications

General

Zones	8
Power Supply	230V AC
Battery Backup	Yes
Tamper Protection	Yes
Communication Format	Contact ID, SIA
Communication	Wired
Compatible with	Honeywell detectors and accessories
Outputs	2