Honeywell CIPer 50 - User Login and Translation Control; Fast Access Lists Configuration

CIPer
TM
MODEL 50 CONTROLLER – INSTALLATION AND COMMISSIONING INSTRUCTIONS
13
31-00233-02
Configuring the RS232 Interface in WEBs N4
When you configure the RS232 interface (for M-Bus) in WEBs N4, the corresponding Port Name will appear
as shown in Figure 5.
Figure 5: Configuring the RS232 Interface in WEBs N4
USB 2.0 Host Interface
Via its USB 2.0 Host interface, the CIPer Model 50 controller can be connected to, e.g., the IF-LON2 External
Interface Adapter and thus to LONWORKS networks. Max. 200 mA, high speed. See also section LonWorks
Communications.
Figure 6: USB 2.0 Host interface
END BIAS MID
USB 2.0 HOST INTERFACE