System Architecture
A CIPer Model 50 System consists of the CIPer Model 50 controller and various Panel Bus I/O modules. The
CIPer Model 50 controller provides interface connections, which allow connection to external systems (e.g.,
BACnet controllers). Via the IF-LON External Interface, the CIPer Model 50 can also communicate with
LONWORKS systems, including Honeywell LONWORKS I/O Modules. For details about system architecture, refer
WEBs N4 System Architecture - 01-00074.
Auxiliary parts (see section Additional Parts, Pg 44) enable special features.
Figure 1: WEBs N4 extended Integrated Building Management architecture
To Next Page
Loading...
