Honeywell CIPer 50 - USB Driver Installation for Windows 10

CIPer
TM
MODEL 50 CONTROLLER – INSTALLATION AND COMMISSIONING INSTRUCTIONS
31-00233-02
44
Additional Parts
Table 18. Additional parts
Order no.
Description
XS830
Set of ten terminals. Each package consists of two
groups of nine internally connected push-in terminals,
for distributing signals / power.
XS831
Set of ten terminals. Each package consists of two
groups of four pairs of push-in terminals (each with a
499 Ω resistor), for converting 0…20 mA signals into
0…10 VDC signals, and one push-in ground terminal
per group.
TPU-11-01
Removable terminal plugs, push-in type; complete set
of 3 plugs (for terminals 1, 2, 24-32); for the WEB-
EHSERIESNX26.
TPU-45-01
Removable terminal plugs, push-in type; complete set
of 9 plugs (for terminals 1 - 47); for the WEB-
EHSERIESNX26.
MVC-80-AC1
Terminal cover (color: RAL9011); package of ten.
MVC-80-AC2
Front door mounting accessory (color: RAL9011);
package of 10.
MVC-40-AC3
Strain relief; package of ten.
A1 A2
A3
A4
A5 A6
A7
A8 A9
B1 B2
B3
B4
B5 B6
B7
B8 B9
A1 B1 A2 B2
A3 B3
A4 B4 G1 G2
A5 B5 A6 B6
A7 B7
A8 B8