Configuring controller redundancy 46
Configuring an I/O module 47
Configuring serial modules 49
Configuring a controller simulator 52
Programming with IEC 61131-3 58
Adding a library 58
Creating a data type 58
Creating a variable 61
Creating a Programming Organization Unit 62
Associating a program to a task 64
Compiling a project 65
Chapter 5 - Operating 67
Connecting a controller 67
Downloading a project to the controller 68
Configuring date/time 69
Setting time source 69
Setting time zone 70
Upgrading firmware 70
Upgrading firmware for a non-redundant controller 71
Upgrading firmware for a redundant controller 72
Upgrading EPM firmware 75
Upgrading ControlEdge 900 I/O module firmware 76
Upgrading serial module firmware 77
Upgrading ControlEdge 2020 Expansion I/O firmware 78
Upgrading the FDAP and field device firmware via Wireless 79
Upgrading the field device firmware 79
Upgrading the FDAP firmware 81
Uploading a project 82
4
Contents
To Next Page
Loading...