CHAPTER
1
ABOUT THIS GUIDE
Revision history
Revision Date Description
A April 2019 Initial release of this document
Intended audience
This documentation allows the following audience to quickly startup
ControlEdge PLC and ControlEdge RTU system: Users who plan,
install, configure, or operate ControlEdge PLC and ControlEdge RTU
running the eCLR (IEC 61131-3) execution environment.
Prerequisite skills
Knowledge of SCADA systems and experience of working in a
Microsoft Windows environment are required.
Introduction to ControlEdge Technology
Item Description
ControlEdge
PLC
ControlEdge 900 controllers running the eCLR (IEC 61131-3) execution
environment with PLC software options configured with ControlEdge
Builder.
ControlEdge
RTU
ControlEdge 2020 controllers running the eCLR (IEC 61131-3)
execution environment with RTU software options configured with
ControlEdge Builder.
ControlEdge
UOC
ControlEdge 900 controllers running the Honeywell control execution
environment (CEE) configured with Experion Control Builder.
Special terms
The following table describes some commonly used industry-wide
and Honeywell-specific terminology:
7
To Next Page
Loading...
Need help?
General
