Honeywell ECS Series User Manual

Model IFP-2100/ECS Installation Manual LS10143-001SK-E
6-9
6.5 Network Management Quick Reference
Menu Options/Defaults Comments
Network
Programing
Learn
Network
Guest or member Add or remove
panels into the
network
See Section 6.2.1
Edit Network
Names
Panel Names Network Panel ID Edit Panel Names See Section 6.2.2
Site Names Edit Site Member Edit Site Names
Edit Panel ID Change current
panel ID
See Section 6.2.3
Computer
Access
Computer Access
Number
*123456 See Section 6.2.4
Computer Code *0
Access Codes
Select Profile
(01 - 20)
Edit Name Profile 1 is the profile that
dictates what functions the
Firefighter Key has access
to. Because this is the
profile for a keys, the user
name and the access code
can not be edited for this
profile.
Profile 2 is the profile for
the installer and is referred
to as the “Installer Code”.
This profile’s user name
and panel functions can
not be edited.
See Section 6.2.5.
Edit Access Code
Panel Functions
System Reset
System Silence
System ACK
Fire Drill Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test-With Report
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Buffer
Point Status
Set SLC Device
Address
SLC Single Device
Locator
SLC Multi-Device
Locator
I/O Point Control
Event History
Set Time & Date
Network Diagnostics

Honeywell ECS Series Specifications

General

Brand	Honeywell
Model	ECS Series
Category	Conference System
Language	English