Honeywell ECS Series User Manual

LS10143-001SK-E Programming Overview
8-12
8.2.5 Mapping LED Points for a Networked System
Figure 8-8 Example of Expanding Mapping of LED Points Across Panels
8.3 Programming Using the HFSS Honeywell Fire
Software Suite
You can use the HFSS Honeywell Fire Software Suite software to program the control panel onsite (personnel
will need to be onsite during the upload or download process). HFSS is a software package that lets you easily
program the control panel using a Windows-based computer. HFSS is needed for Mapping. When using HFSS,
you can set up the programming options for the panel, save the options in a file, then download the file to the
panel. You can connect to the control panel directly using the onboard USB. Updates are available at
www.farenhyt.com
8.4 Programming Using an Annunciator
Many of the features can be programmed through the system annunciator, using either the control panel’s on-
board annunciator or RA-2000, RA-1000, or RA-100 remote annunciators.
The following subsections describe programming basics, including a description of editing keys available for
programming and how to move through programming menus. Section 9 contains specific information about
individual programming options.
8.4.1 Entering / Exiting Panel Programming
To enter Program Mode:
1. Enter the Installer Code (factory programmed default code is 123456).
2. Select 7 for Programming Menu. See Section 9 for detailed menu information and Section 8.5 for a quick
reference listing all programmable options and JumpStart
®
defaults.

Honeywell ECS Series Specifications

General

Brand	Honeywell
Model	ECS Series
Category	Conference System
Language	English