73022344 o
2.2 Authorized (hardware) personnel
The operator of the system or device is responsible for selecting the personnel. Suitable
personnel have been verified as possessing the required knowledge from this manual,
have received induction training and at least satisfy the requirements set out in this
document.
The manufacturer cannot accept any liability for damage and consequential damage
caused by untrained personnel.
ATTENTION
Assembly, electrical installation, commissioning and inspection and
maintenance work (opening the housing) may only be carried out by
trained personnel authorized by Honeywell.
The appropriate personnel have the expertise set out in Annex A of EN IEC 60079-14
or has comparable expertise, including:
•
General safety rules
•
Care and use of reasonable safety equipment
•
Electrical safety and explosion-protection rules
•
Working on electrical circuits for systems with potentially explosive
atmospheres
•
Working with high pressures and aggressive or hazardous media
•
Safety and warning information from this manual
CAUTION
Suitable personnel must definitely have the ability to identify dangers
and risks, assess their work and avoid possible hazards.
.
ATTENTION
Before starting work, everybody engaged to carry out hardware work on or
with the device must be familiar with the content of this manual. Any
unclear points and questions must be clarified before starting work.
To Next Page
Loading...
Need help?
General
