73022344 o
CAUTION
Recommissioning must not be carried out in a potentially explosive gas
atmosphere and before you switch on the device, ensure that all the gas
connections are sealed and the earthing or protective conductor has been
installed correctly.
CAUTION
The used flame paths for this device are not intended for repair.
ATTENTION
All removable covers and hoods for opening the housing must be
protected against accidental opening by security screws
Danger of explosion
CAUTION
Danger of explosion in the event of incorrect installation and connection.
Before the device is switched on or switched back on, ensure that all the gas
connections are sealed and the earthing or PE wire is correctly installed.
CAUTION
Do not operate or use damaged devices or devices with modified
housings or with an incorrect connection since explosion protection is no
longer guaranteed in this case.
CAUTION
Safety information on the device:
DISCONNECT POWER BEFORE OPENING
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
CAUTION
If the device is not serviced or maintained correctly, there is a danger that
it will explode. Contact the manufacturer for repair work which affects the
explosion protection and the flameproof properties of the device.
CAUTION
DO NOT OPEN THE DEVICE IF.
•
IT IS IN A POTENTIALLY EXPLOSIVE ATMOSPHERE
•
THE CONDITIONS DESCRIBED IN ISO/IEC 61010-1 ARE NOT
COMPLIED WITH
•
YOU DO NOT HAVE THE PERMISSION OF THE MANUFACTURER
AND OF THE STATION OPERATOR TO DO SO
3
Functional Design of EnCal 3000
To Next Page
Loading...
Need help?
General
