73022344 o
In general the manual is aimed at trained personnel in the gas industry or process
measuring sector. It contains the explosion-relevant information as well as a summary
of relevant safety and warning notices. In addition to general expertise, it enables the
enCal 3000 to be handled safely and efficiently.
Compliance with all given information and instructions is a requirement for safe working
practice and correct handling of the device. It will ensure the functions of the device,
deliver reliable measurement results, extend the service life of the device and save you
service and spare parts costs.
Furthermore, the directives, standards, local accident prevention regulations and
general safety regulations, which apply to the field of application of the device, must be
applied and obeyed..
Following table shows the development of this document.
Revision
RevisionRevision
Revision
Date
DateDate
Date
Description
DescriptionDescription
Description
a to l 2008 until 2016
Historic development
m August 04, 2017
New Interconnection board
n Feb. 22, 2018 New temperature range
o August 20, 2018
New CE Declaration and
extension to Honeywell document design
1.1.1 How to use this manual
It is essential that you read through the relevant section of this document before starting
work to ensure that you have a thorough understanding of the measuring system.
ATTENTION
Safety information and warnings must be followed to the letter.
CAUTION
A lack of symbols or information does not release you from your safety
duties or responsibility for safety.
If you use the device together with devices from other manufacturers or third-party
equipment, you must ensure that these are suitable components. These components
will have their own product documentation which also must be obeyed. Ensure that all
the technical documentation is available in the system and near the device.
To Next Page
Loading...
Need help?
General
