Honeywell ENCAL 3000

COMMISSIONING AND DE
COMMISSIONING
EnCal 3000
Hardware
Manual
73022344 o
84
Steps
Steps Steps
Steps Decommissioning (temporary)
Decommissioning (temporary)Decommissioning (temporary)
Decommissioning (temporary) !Obey the explosion protection regulations!
!Obey the explosion protection regulations!!Obey the explosion protection regulations!
!Obey the explosion protection regulations!
1.
Switch off the voltages (supply and communication) and secure them against being
switched on again.
2.
Shut down all gas streams and depressurize all gas inlets. Ensure that you prevent the
shut-off valves being reopened unintentionally by taking suitable precautions.
If you intend to remove the device in full, supplement the above steps with the
following:
Steps
Steps Steps
Steps Decommissioning (long
Decommissioning (longDecommissioning (long
Decommissioning (long-
--
-term)
term)term)
term) !Obey the exp
!Obey the exp!Obey the exp
!Obey the explosion protection regulations!
losion protection regulations!losion protection regulations!
losion protection regulations!
3.
Allow the device to cool to ambient temperature and disconnect all the gas pipelines at
the couplings. Immediately seal all outlets and inlets.
4.
Cut all the cables near the cable glands in an area which does not contain a potentially
explosive atmosphere and remove the device mechanically.
5.
Comply with the storage and disposal instructions, regardless of whether you have
completed all the above steps.
Removed devices should generally be stored in the same way as new devices. We
recommend replacing the battery by Honeywell service personnel before using again.
At the end of the period of use of this device, the manufacturer offers professional,
environmentally compatible disposal.
Send the device to the address specified on the type label. The EU-WEEE sign
with a crossed-out dustbin, which you will also find on the device, symbolises
that the device in the EU must not be disposed of with household waste. Instead,
you must return it to the local collection points for electrical waste, if you not
want send it back.
Outside the EU, it is essential that you comply with the current laws for
disposing of industrial waste, if you dispose of the device yourself