Serial essernet
®
interface (SEI1)
38 FB 798819 / 05.18
Intended purpose
This products may only be used for the applications outlined in the catalogue and in the technical
description, and only in conjunction with the recommended and approved external devices and
components.
This documentation contains registered and unregistered trademarks. All trademarks are the
property of the respective owners. The use of this documentation does not grant you a licence
or any other right to use the name, logo and/or the label.
This documentation is subject to the copyright of Honeywell. The content must not be copied,
published, modified, distributed, transmitted, sold or changed without the express prior written
permission of Honeywell.
The information contained in this documentation is provided without warranty.
Safety-related user information
This manual includes all information required for the proper use of the products described.
In order to ensure correct and safe operation of the product, all guidelines concerning its
transport, storage, installation, and mounting must be observed. This includes the necessary
care in operating the product.
The term 'qualified personnel' in the context of the safety information included in this manual or
on the product itself designates:
• project engineers who are familiar with the safety guidelines concerning fire alarm and
extinguishing systems.
• trained service engineers who are familiar with the components of fire alarm and
extinguishing systems and the information on their operation as included in this manual.
• trained installation or service personnel with the necessary qualification for carrying out
repairs on fire alarm and extinguishing systems or who are authorised to operate, ground
and label electrical circuits and/or safety equipment/systems.
Symbols
The following information is given in the interest of personal safety and to prevent damage to
the product described in this manual and all equipment connected to it.
Safety information and warnings for the prevention of dangers putting at risk the life and health
of user and maintenance personnel as well as causing damage to the equipment itself are
marked by the following pictograms. Within the context of this manual, these pictograms have
the following meanings:
Warning - Designates risks for man and/or machine. Non-compliance will create
risks to man and/or machine. The level of risk is indicated by the word of warning.
Note - Important information on a topic or a procedure and other important
information!
Standards and guidelines - Observe configuration and commissioning
information in accordance to the national and local requirements.
In accordance with Directive 2002/96/EG (WEEE), after being dismantled,
electrical and electronic equipment is taken back by the manufacturer for proper
disposal.
To Next Page
Loading...
