Serial essernet
®
interface (SEI1)
66 FB 798819 / 05.18
12.2 Menu >Configuration<
The menu >Configuration< is used to program general data, e.g. the type of the serial essernet
interface. In addition, this menu is used to enter the numbers of the detector zones (zone
numbers) and the number of control zones, FACPs, and sub nets which are connected to the
serial essernet
interface.
Fig. 21: Configuration - menu
General configuration
For selecting the type of the serial essernet
interface and for selecting the interface to which
the sub net or other FACPs are connected.
Zone ranges
For setting the zone intervals in the range of 0 to 9999.
Output ranges
For setting the control zone intervals in the range 0-9999.
The zone and control zone numbers must be unique and must not be used twice in
the essernet
and the sub nets.
To Next Page
Loading...
