FMC2000 User’s Guide
16.4 DOF
Delay Off. This is the delay time for the relay switch turning off
(returing to its pre-alarm state).
1. Press Enter.
2. Press number keys to enter a new Delay Off value (0 to 60
seconds).
3. Press Enter to save the new value.
4. Press the up or down arrow to step to the next or previous
column.
16.5 Lock
Lock relay after an action triggered by an alarm condition. When
Lock is turned on, the alarm latches after it is triggered.
Note: When “Lock” is on, you must enter this menu to turn off a
latched alarm.
5. Press Enter. You will see a menu of Off and On.
6. Press the up or down arrow to select Off or On.
7. Press Enter to save the new value.
8. Press the up or down arrow to step to the next or previous
column.
55
To Next Page
Loading...
